The synchronous coupling of a third-generation wave model and a two-dimensional storm surge model     

M.Y. Zhang  Y.S. Li 《Ocean Engineering》1996,23(6):533-543

The interaction of waves and currents is studied by the dynamical coupling of a third generation wave model and a two-dimensional storm surge model. The coupling process of the two models is implemented synchronously. To estimate the effects of waves on the generation of storm surges, the theory of Janssen is used. The effects of the wave radiation stress on surge levels and the effects of storm-induced currents on waves are also investigated.The coupled wave and storm surge models have been tested by hindcasting two storm events in the northern South China Sea. The use of the Simth and Banke stress relation underestimates the surges by 10%. The inclusion of the radiation stress improves the accuracy of the computed results slightly by 2%. The introduction of a wave-dependent surface drag gives a significant improvement. The storm-induced currents clearly affect the wave characteristics at the peak stage. However, as far as the prediction of wave height is concerned, it is better not to consider the wave radiation stress in the storm surge model unless this is accompanied by a wave-dependent surface drag.  相似文献   

Three-dimensional visualization of mission planning and control forthe NPS autonomous underwater vehicle   总被引：1，自引：0，他引：1  

Zyda  M.J. McGhee  R.B. Kwak  S. Nordman  D.B. Rogers  R.C. Marco  D. 《Oceanic Engineering, IEEE Journal of》1990,15(3):217-221

The Naval Postgraduate School (NPS) is constructing a small autonomous underwater vehicle (AUV) with an onboard mission control computer. The mission controller software for this vehicle is a knowledge-based artificial intelligence (AI) system requiring thorough analysis and testing before the AUV is operational. The manner in which rapid prototyping of this software has been demonstrated by developing a controller code on a LISP machine and using an Ethernet link with a graphics workstation to simulate the controller's environment is discussed. The development of a testing simulator using a knowledge engineering environment (KEE) expert system shell that examines AUV controller subsystems and vehicle models before integrating them with the full AUV for its test environment missions is discussed. This AUV simulator utilizes an interactive mission planning control console and is fully autonomous once initial parameters are selected  相似文献   

Bacterial sulphate reduction in sediments of a european salt marsh: Acid-volatile and tin-reducible products     

D. B. Nedwell  S. Takii 《Estuarine, Coastal and Shelf Science》1988,26(6)

The products of ³⁵S-sulphate reduction by sedimentary bacteria were measured at two sites in a salt marsh on the east coast of England. Non-acid-volatile products were measured, after acid-volatile sulphide was removed, by their reduction to sulphide by digestion with tin. The proportion of the sulphate reduced to tin-reducible products varied between 25% in a salt marsh pan and 61% in creek sediment, over a 0–25 cm depth profile. There were also variations with depth at each site in the proportions of sulphate reduced to tin-reducible products. Further examination revealed differences in the proportions of sulphate which were reduced to free sulphide, acid-volatile sulphide, sulphur or pyrite at the two sites. The data suggest that previous work which did not measure non-acid-volatile products underestimated sulphate reduction rates by three-fold in the creek site, but by only one third in the pan.  相似文献   

Species composition and biomasses of fishes in tropical seagrasses at Groote Eylandt, northern Australia     

S.J.M. Blaber  D.T. Brewer  J.P. Salini  J.D. Kerr  C. Conacher 《Estuarine, Coastal and Shelf Science》1992,35(6)

  相似文献   

Circulation and water properties of the southwest Indian Ocean, Spring 1987     

M.L. Gründlingh  R.A. Carter  R.C. Stanton 《Progress in Oceanography》1991,28(4)

  相似文献   

The distributions of particulate atmospheric trace metals and mineral aerosols over the Indian Ocean     

R. Chester  A. S. Berry  K. J. T. Murphy 《Marine Chemistry》1991,34(3-4)

Data are presented for the concentrations of Al, Fe, Mn, Ni, Co, Cr, V, Cu, Zn, Pb and Cd in aerosols collected over two contrasting regions of the Indian Ocean. These are: (1) the northern Arabian Sea (AS), from which samples were collected in the northeast monsoon, during which the region receives an input of crustal material from the surrounding arid land masses; and (2) the Tropical Southern Indian Ocean (TSIO), a remote region from which samples were collected from air masses for which there were no large-scale up-wind continental aerosol sources. The TSIO samples can be divided into two populations: Population I aerosols, collected from air masses which have probably impinged on Madagascar, and Population II aerosols, which have been confined to open-ocean regions to the south of the area.The data indicate that there are strong latitudinal variations in the chemical signatures of aerosols over the Indian Ocean. The input of crustal material to the Arabian Sea gives rise to an average Al concentration of about 1000 ng m⁻³ of air in the northeast monsoon regime. As a result, the concentrations of all trace metals are relatively high, and the values of crustal enrichment factors are less than 10 for most metals, in the AS aerosols. In contrast, TSIO Population II ‘open-ocean southern air’ sampled during the southwest monsoon season, has an average Al concentration of only about 10 ng m⁻³ of air. Trace metal concentrations in the TSIO ‘open-ocean southern air’ during the southwest monsoon season are representative of ‘clean’ remote marine air and are generally similar to those reported over the central North Pacific.Mineral dust concentrations over the Indian Ocean decrease in a north to south direction, from about 15–20 μg m⁻³ of air in the extreme north to about 0.01–0.25 μg m⁻³ of air in the far south. The deposition of mineral dust over the northern Arabian Sea can account for approximately 75% of the non-carbonate material incorporated into the underlying sediments.In the Arabian Sea the dissolved atmospheric inputs of all the trace metals, with the exception of Cu and Co, exceed those from fluvial run-off by factors which range from 9.6 for Pb to 1.6 for Cr.  相似文献   

Holocene sedimentation of a wave-dominated barrierisland shoreline: Cape Lookout, North Carolina     

S.Duncan Heron Jr.  Thomas F. Moslow  William M. Berelson  John R. Herbert  George A. Steele III  Kenneth R. Susman   《Marine Geology》1984,60(1-4):413-434

The sedimentary record of 130 km of microtidal (0.9 m tidal range) high wave energy (1.5 m average wave height) barrier island shoreline of the Cape Lookout cuspate foreland has been evaluated through examination of 3136 m of subsurface samples from closely spaced drill holes. Holocene sedimentation and coastal evolution has been a function of five major depositional processes: (1) eustatic sea-level rise and barrier-shoreline transgression; (2) lateral tidal inlet migration and reworking of barrier island deposits; (3) shoreface sedimentation and local barrier progradation; (4) storm washover deposition with infilling of shallow lagoons; and (5) flood-tidal delta sedimentation in back-barrier environments.

Twenty-five radiocarbon dates of subsurface peat and shell material from the Cape Lookout area are the basis for a late Holocene sea-level curve. From 9000 to 4000 B.P. eustatic sea level rose rapidly, resulting in landward migration of both barrier limbs of the cuspate foreland. A decline in the rate of sea-level rise since 4000 B.P. resulted in relative shoreline stabilization and deposition of contrasting coastal sedimentary sequences. The higher energy, storm-dominated northeast barrier limb (Core and Portsmouth Banks) has migrated landward producing a transgressive sequence of coarse-grained, horizontally bedded washover sands overlying burrowed to laminated back-barrier and lagoonal silty sands. Locally, ephemeral tidal inlets have reworked the transgressive barrier sequence depositing fining-upward spit platform and channel-fill sequences of cross-bedded, pebble gravel to fine sand and shell. Shoreface sedimentation along a portion of the lower energy, northwest barrier limb (Bogue Banks) has resulted in shoreline progradation and deposition of a coarsening-up sequence of burrowed to cross-bedded and laminated, fine-grained shoreface and foreshore sands. In contrast, the adjacent barrier island (Shackleford Banks) consists almost totally of inlet-fill sediments deposited by lateral tidal inlet migration. Holocene sediments in the shallow lagoons behind the barriers are 5–8 m thick fining-up sequences of interbedded burrowed, rooted and laminated flood-tidal delta, salt marsh, and washover sands, silts and clays.

While barrier island sequences are generally 10 m in thickness, inlet-fill sequences may be as much as 25 m thick and comprise an average of 35% of the Holocene sedimentary deposits. Tidal inlet-fill, back-barrier (including flood-tidal delta) and shoreface deposits are the most highly preservable facies in the wave-dominated barrier-shoreline setting. In the Cape Lookout cuspate foreland, these three facies account for over 80% of the sedimentary deposits preserved beneath the barriers. Foreshore, spit platform and overwash facies account for the remaining 20%.  相似文献   

A statistical analysis of non-linear random waves   总被引：2，自引：0，他引：2  

R. S. Langley 《Ocean Engineering》1987,14(5)

A statistical analysis of unidirectional non-linear random waves is presented which is based on second-order random wave theory. The analysis technique is similar to a method which is available for the statistical analysis of a two-term Volterra series. It is shown that the statistical problem can be reduced to that of finding the eigenvalues and eigenvectors of two real symmetric matrices, from which the cumulants, the characteristic function, and the probability density function of the surface elevation can be found. Various numerical examples are considered, and the possibility of extending the technique to deal with spreading seas is discussed.  相似文献   

A case study of a modified gravity type cage and mooring system using numerical and physical models   总被引：2，自引：0，他引：2  

DeCew  J. Fredriksson  D.W. Bugrov  L. Swift  M.R. Eroshkin  O. Celikkol  B. 《Oceanic Engineering, IEEE Journal of》2005,30(1):47-58

A modified gravity-type cage, developed by SADCO Shelf Ltd., was examined using numerical and physical models to determine if the cage and mooring system is suitable for an exposed site south of the Isles of Shoals, NH. The 3000-m/sup 3/ SADCO Shelf Submersible Fish Cage has angled stays between the upper framework and the ballasted bottom rim (in addition to net) to resist the horizontal shear deformation. The mooring system consists of three legs-each made up of a taut vertical chain and an angled rope, both leading to deadweight anchors. Normalized response amplitudes (response amplitude operators) were found for motion response in heave, surge and pitch, and load response in the anchor and bridle lines, in regular (single frequency) waves. In addition, a stochastic approach was taken to determine the motion and load transfer functions in random waves using a spectrum representative of seas at the selected site. In general, the system motion had a highly damped response, with no resonant peaks within the wave excitation range of 0.05 to 0.45 Hz. The anchor line force response was at all frequencies below 5 kN per meter of wave amplitude. The physical model tests showed consistently more conservative (larger) results compared to those for the numerical model.  相似文献   

Scaling analysis of deposition from turbidity currents   总被引：3，自引：0，他引：3  

L.?Srivatsan  Larry?W.?Lake  Roger?T.?BonnecazeEmail author 《Geo-Marine Letters》2004,24(2):63-74

Many oil-bearing sedimentary deposits are formed by the settling of particles from turbidity currents. Modeling sedimentary processes that form these turbidites enables the calculation of properties such as extent, depth, porosity and permeability of hydrocarbon-bearing reservoirs. This paper estimates the extent and thickness of turbidites from the initial conditions of the turbidity flow. This is achieved by the application of scaling analysis of the partial differential equations that govern the dynamics of and deposition from turbidity currents. We apply the results of scaling analysis to five modern submarine fans. The predicted and actual values of the dimensions of the fan deposits match well. We then compare the derived results against tabulated sizes of ancient turbidites. The comparisons are good as long as we correctly identify the flow regimes in which the deposition took place. The good agreements observed in the two cases show that the estimates obtained using scaling analysis can provide useful first-guess values for the dimensions of the deposits.  相似文献